For proper communication between C-MOR and the camera both need to use the same protocol for communication. Choose, depending on the camera type, RTSP, HTTP, HTTPS, FTP or MJPEG for transmission. This setting is depending on what is supported by the connected camera. The most cameras wok with HTTP or RTSP.
Please check to enter the correct port. This value can change after you set a protocol and should be checked. Enter the value your camera specifies. Information regarding this can be found at the configuration pages of your camera or can be found in the manual.
The standard ports are:
| Protocol | Port |
| HTTP | 80 oder 8080 |
| HTTPS | 443 |
| RTSP | 554 |
| FTP | 21 |
| MJPEG | 8008 |
Note
This data must agree according to the values which were set with the camera specific configuration utility or with the web interface. Otherwise, the camera won’t be accessible for C-MOR for recording.